Task IV.A
Maneuver Lesson
To determine the applicant understands the elements associated with a maneuver Task selected from Area of Operation VII through Area of Operation XII (ASEL, ASES) or Area of Operation VII through Area of Operation XIII (AMEL, AMES) and applies that knowledge when delivering ground instruction.
Note: The evaluator asks the applicant to present a preflight lesson on the selected maneuver as the lesson would be taught to a student and determines the outcome of this Task before the flight portion of the practical test. Previously developed lesson plans from the instructor applicant's library may be used.
References: FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-9, FAA-H-8083-23, FAA-H-8083-25; POH/AFM
Quick Review
Conversational Q&A — quiz yourself before the oral.
The evaluator picks a maneuver Task and has you present a preflight lesson on it exactly as it would be taught to a student — a ground event, scored before the flight portion of the practical test (ACS-25, Area IV note). You are graded as a teacher briefing a learner, not as a pilot describing a maneuver, and the Task is graded and closed out before you ever start the engine.
Miss the standard and you fail the Task and its Area of Operation, and the evaluator issues a Notice of Disapproval of Application — after which the evaluator or the applicant may end the test, and the evaluator may continue only with your consent (ACS-25, Appendix 1). So the brief can end the checkride on the ramp. Area IV is also its own required area of operation under 61.187(b)(1)(iv) for the airplane single-engine rating.
Previously developed lesson plans from your library may be used (ACS-25, Area IV note).
Any maneuver Task from Area of Operation VII through XII for ASEL/ASES, or VII through XIII for AMEL/AMES (ACS-25 Task IV.A objective). That is takeoffs and landings, fundamentals of flight, performance and ground reference maneuvers, slow flight/stalls/spins, basic instrument maneuvers, emergency operations — and multiengine operations for the multi ratings.
Practically: you need a lesson plan on file for every maneuver in those areas, because you do not get to choose. Build the library before the checkride, not during it.
- K1 — Purpose of the maneuver. Why it exists, what skill it builds, where it shows up in real flying.
- K2 — Elements of the maneuver and the associated common errors. The step-by-step, plus the errors a student actually makes and how you name and correct them.
- K3 — Desired outcome(s), including completion standards.
The skill element AI.IV.A.S1 then says: deliver instruction on the selected maneuver using a lesson plan, teaching methods, and teaching aids, as appropriate, that incorporate K1 through K3. All three have to appear in the delivery — not just in the paperwork.
Either. The AIH says commercially developed lesson plans are acceptable for most training situations, including use by flight instructor applicants during their practical tests (AIH 7-9), and the ACS note says previously developed plans from your library may be used.
But the same paragraph warns that even well-designed preprinted plans may need to be modified, and instructors are encouraged to adapt them for specific learners or circumstances (AIH 7-9). If you hand over a canned plan you can't defend line by line, you'll lose the Task on delivery even though the paper was legal.
Three things: objectives, content to support the objectives, and completion standards (AIH 7-9). That's the irreducible core — the AIH notes that authorities divide these main headings into various subheadings and that even the terminology varies (completion standards may be called assessment, review and feedback, or performance evaluation).
The expanded flight-lesson format most CFI applicants use — objective, elements, schedule, equipment, instructor's actions, learner's actions, completion standards — is just those three headings subdivided. The AIH explicitly ties them to the training objective: the objective components supply the elements of the lesson and the schedule of events, the equipment necessary, the instructor and learner actions anticipated, and the criteria supply the completion standards (AIH 5-7).
Because another instructor should be able to take the lesson plan and know what to do in conducting the same period of instruction, and because in writing it can be analyzed for adequacy and completeness (AIH 7-7). The AIH is blunt: a mental outline of a lesson is not a lesson plan.
Writing plans also means you have, in effect, taught the lesson to yourself before teaching it to a learner (AIH 7-8). A well-used plan should assure wise selection of material, give due consideration to each part of the lesson, sequence the material for efficient learning, relate the lesson to the course objectives, give an inexperienced instructor confidence, and promote uniformity of instruction regardless of who teaches it or when (AIH 7-8).
With the three elements of the introduction: attention, motivation, and overview (AIH 5-9).
- Attention — a story, a question, a short video: it must relate to the subject and set up the learning outcome. An unrelated joke distracts from the lesson.
- Motivation — specific reasons why this content matters to this learner, which establishes readiness (law of readiness).
- Overview — a clear, concise statement of the objective and key ideas, a road map of the route to be followed. A good visual aid helps here.
Then comes development (the body) and a conclusion that retraces the important elements and relates them to the objective — and introduces no new ideas (AIH 5-10).
The demonstration-performance method — best used for the mastery of mental or physical skills that require practice, built on the principle that people learn by doing (AIH 5-21). Five phases:
- Explanation — clear, tied to the lesson objective, based on what the learner already knows; end by encouraging questions on any step.
- Demonstration — show the actions; exclude extraneous activity; if the demonstration deviates from the explanation, acknowledge and explain the deviation immediately.
- Learner performance and 4. instructor supervision — separate actions that occur at the same time; give the learner a chance to perform as soon as possible after the demonstration, coaching as necessary.
- Evaluation — the learner works independently and you judge how well the skill was mastered, which also measures how effective your instruction was (AIH 5-21 to 5-22).
The AIH's guidance for instructional aids (AIH 5-23 to 5-26):
- Aids support, supplement, or reinforce what's being taught — they are not self-supporting.
- Concentrate aids on the key points, not on everything.
- Simple is best; keep words on the aid to a minimum since it accompanies a verbal presentation.
- Aids are especially appropriate when a point is complex and difficult to put into words, when long technical description is needed, when you find yourself forming visual images, or when learners are puzzled by an explanation.
- Don't use the aid as a crutch, and avoid distracting artwork or gimmicks that pull attention off the subject.
A model — a copy of a real object, enlarged, reduced, or same-size — plus a whiteboard covers nearly every maneuver brief (AIH 5-27).
Oral questioning is the most common means of assessment, and proper quizzing checks retention and comprehension, reveals whether your teaching methods worked, identifies points needing more emphasis, and keeps the learner actively participating (AIH 6-11).
Never ask "Do you understand?" or "Do you have any questions?" — the AIH names yes/no questions as ineffective quizzing (AIH 6-11). Also avoid puzzle, oversize, toss-up, bewilderment, trick, and irrelevant questions (AIH 6-11 to 6-12).
Effective questions apply to the subject, are brief and clear, are adapted to the learner's stage of training, center on only one idea, and present a challenge (AIH 6-11). Write them into the lesson plan in advance and supplement with impromptu ones as the lesson runs.
The student's. You are teaching the lesson as it would be taught to a student, so the completion standards you state are the ones that student is being trained to — for a private applicant learning steep turns, 45° bank, ±100 feet, ±10 knots, ±5° of bank, roll out on entry heading ±10° (PA.V.A.S3, PA.V.A.S5).
Know your own standard too, because you fly the maneuver later that day: the CFI ACS calls for approximately a 50° bank, same ±100 feet / ±10 knots / ±5° / ±10° tolerances, in both directions (AI.IX.A.S3–S6). The obligation to narrate while you fly it isn't in those skill elements — it comes from the ACS's statement of what the flight portion evaluates: ability to perform the Tasks at the level of a commercial pilot while giving effective flight instruction (ACS-25, Appendix 1).
Deep Dive
Building the lesson plan
The plan is the artifact the evaluator watches you use, not a script you read. The AIH's planning cycle: determine the objective, research the subject as the objective defines it, choose the method of instruction, pick a lesson planning format, decide how to organize the lesson, select support material, assemble training aids, and write the outline — one technique being to write the beginning and the ending first, then fill in and revise (AIH 7-8).
Scope, practicality, and unity are three of the seven lesson-planning characteristics — unity, content, scope, practicality, flexibility, relation to course of training, and instructional steps, all covered under Task I.C. — where applicants actually lose points, because this Task is graded on a single maneuver lesson (AIH ch. 7):
- Scope is the usual failure. Asked to teach one maneuver, applicants teach the whole Area — steep turns become a lecture on load factor, stall speed, and the flight envelope. Too much material produces confusion. Pick the objective, state it as a desired learning outcome, and let the rest go
- Practicality is second. A plan written for a classroom doesn't survive in the airplane, and this lesson is a preflight lesson for a maneuver to be performed in flight — the evaluator is listening for a brief the student could actually carry into the cockpit, not a ground school module
- Unity is third. One unified segment with limited objectives. If you can't say the desired learning outcome in one sentence, the plan isn't unified yet
And the one that's simply pass/fail: the plan must be written. A mental outline is not a lesson plan — it has to be complete enough that another instructor could pick it up and teach the same period, and complete enough that you can analyze it for adequacy afterward.
Use a performance-based objective: description of the skill or behavior, the conditions, and the criteria (AIH 5-5).
- Skill/behavior stated in concrete, measurable terms. Avoid "knowledge of…" and "awareness of…" — they can't be measured. Prefer "able to select from a list of…", "able to repeat the steps to…"
- Conditions — the rules for the demonstration: equipment, references, limiting parameters. If a reader thinks "but what if…?", the conditions need clarification.
- Criteria — the standards that measure accomplishment, defined so there is no question whether performance met the objective.
Do this and the completion standards write themselves — the criteria are the completion standards (AIH 5-7).
Development is the main part of the lesson; organize the material logically to show the relationships among the main points, using one of four patterns (AIH 5-10):
- Past to present — chronological; good when history matters.
- Simple to complex — lead from simple facts to the concept. The AIH says outright: don't be afraid to omit less important information at first to simplify learning.
- Known to unknown — start from something the learner already has. For steep turns that's the medium-bank level turn they can already fly.
- Most frequently used to least used.
Under each main point the subordinate points should lead naturally to the next, with meaningful transitions that keep the learner aware of where they've been and where they're going — this is what lets them sort information in working memory (AIH 5-10).
Risk management inside the brief
The Task's only risk element is AI.IV.A.R1 — the selected maneuver Task, and the ACS phrasing for risk throughout the CFI ACS is that the applicant explains and teaches how to identify and manage risk. So the brief must include the risk conversation you'd actually have with a student, not a recital.
Start with the selected Task's own risk elements. For steep turns, those are (AI.IX.A.R1–R5):
- Division of attention between aircraft control and orientation
- Collision hazards
- Low altitude maneuvering, including stall, spin, or CFIT
- Distractions, task prioritization, loss of situational awareness, or disorientation
- Uncoordinated flight
Then add the items the FAA flags across all flight instruction (AIH 8-6):
- Positive aircraft control
- Procedures for positive exchange of flight controls
- Stall and spin awareness
- Collision avoidance
- CFIT
- ADM/risk management
- Checklist usage
- Spatial disorientation
Brief it before the flight — the AIH says the preflight briefing should include procedures for the exchange of flight controls, and recommends the positive three-step process (AIH 9-8). Numerous accidents have come from misunderstanding about who was flying, particularly between learners and instructors.
The teaching sequence for a maneuver (AIH 9-8):
- You demonstrate first.
- The learner follows along on the controls during the demonstration.
- The learner performs while you follow along.
When you need the airplane, take it and calmly announce "I have the flight controls." Leaving an anxious learner on the controls means you may not have full and effective control — the AIH notes anxious learners can be incredibly strong and react inappropriately, and there is nothing to be gained by fighting for control during a recovery. Learners should never be allowed to exceed the instructor's limits, and instructors should not exceed their own ability to perceive a problem, decide, and physically react (AIH 9-8).
A worked lesson plan
The AFH's list of common errors for steep turns (AFH 10-3):
- Not clearing the area
- Inadequate pitch control on entry or rollout
- Gaining or losing altitude
- Failure to maintain constant bank angle
- Poor flight control coordination
- Ineffective use of trim
- Ineffective use of power
- Inadequate airspeed control
- Becoming disoriented
- Performing by reference to the flight instruments rather than visual references
- Failure to scan for traffic
- Attempting to start recovery prematurely
- Failure to stop the turn on the designated heading
Teach them before the flight so the learner recognizes the error as it develops, and pair each one with its correction — that pairing is what AI.IV.A.K2 is asking for, and what the flight portion's analyze and correct common errors skill element will test later (AI.IX.A.S6).
Split it. The desired outcome is the capability: after this lesson the learner divides attention between attitude, altitude, bank, and traffic while sustaining a high-load-factor turn, and recognizes and corrects deviations without prompting. The completion standard is the measurable criterion that proves it — the ACS numbers.
Two cautions from the AIH: the ACS is limited to the most critical job tasks and does not represent an entire training syllabus, and professional instructors should not limit their objectives to the published minimums for certification (AIH 5-5). Say that out loud in the brief; it separates a teacher from a test-prepper.
Delivering it on checkride day
Your check questions should climb the practical learning levels — rote, understanding, application, correlation (AIH 3-14), covered under the fundamentals-of-instructing Tasks. In a maneuver brief that means moving from "what's the entry speed" to "you're 150 feet low with the nose well below the horizon — what's your first input, and why not the elevator?"
Four rules from AIH 7-9:
- Be familiar with it. Study each step and know as much related information as possible — the evaluator will push past the outline.
- Use it as a guide, not a script. Its job is to keep you from wandering off track, omitting essential points, or introducing irrelevant material.
- Adapt it to the learner. If the procedures in the plan aren't producing the desired results, change the approach. In flight, a plan may need heavy modification for gaps in the learner's knowledge — sometimes abandoned in favor of review.
- Revise it periodically as regulations, aids, and manuals change.
The AIH also recommends a dry run with another instructor acting as critic before you deliver a lecture (AIH 5-11). Rehearse the brief on a working CFI before the checkride.
Predictable failures, each traceable to a source:
- Talking at the evaluator instead of teaching a student. S1 says deliver instruction; a monologue with no questions, no aid, and no checks for understanding isn't instruction.
- Reading the plan aloud. It's a guide, not a script (AIH 7-9).
- Skipping the motivation element — the why this matters to you — so the lesson opens with numbers and never earns the learner's attention (AIH 5-9).
- Omitting common errors, which is half of K2.
- Quoting your own CFI tolerances instead of the student's, or quoting no completion standards at all (K3).
- Using an aid as a crutch — a slide deck read verbatim, or a whiteboard diagram that never gets referenced again (AIH 5-24).
- A library with holes. The evaluator selects from Areas VII–XII (VII–XIII for multi); a missing plan for the one maneuver they pick is a Notice of Disapproval waiting to happen. (That's the unsatisfactory outcome — a Letter of Discontinuance is a different animal, used when the test stops for reasons outside your performance.)
Official ACS elementsreference
Knowledge3 elements
The applicant demonstrates understanding of:
AI.IV.A.K1Purpose of the maneuver.AI.IV.A.K2Elements of the maneuver and the associated common errors.AI.IV.A.K3Desired outcome(s), including completion standards.
Risk Management1 element
The applicant is able to identify, assess, and mitigate risk associated with:
AI.IV.A.R1The selected maneuver Task.
Skills1 element
The applicant exhibits the skill to:
AI.IV.A.S1Deliver instruction on the selected maneuver using a lesson plan, teaching methods, and teaching aids, as appropriate, that incorporate K1 through K3.